Panasonic KX-HNC600C, Installation Manual

Page: 20 / 64

3
Attach the camera to the stand using the
stand attachment hole on the rear or
bottom of the camera, depending on the
direction you want to aim the camera.
R Loosen the screw (
1
).
R Insert the tip of the stand ( A ) into the
stand attachment hole ( B ) on the rear
or bottom side.
R Secure the camera by tightening the
screw (
2
).
Attaching to the hole on the rear side
1
1
2
2
Attaching to the hole on the bottom
side
1
2
1 2
4
Adjust the camera angle.
R Loosen the screw (
1
) and then adjust
the camera to the desired angle.
R Tighten the screw (
1
) while holding
the screw (
2
) until the camera is
secure.
1 1 2
20 For assistance, visit www.panasonic.ca/english/support
Setup
HNC600C_(en_en)_0113_ver.201.pdf 20 2017/01/13 11:54:14