Panasonic KX-HNA101, User Manual

Page: 95 / 120

3
Change the settings as desired, and then tap [OK] .
– [Location] : This setting determines the location name assigned to the device.
– [Name] : This setting determines the name assigned to the device.
Device profiles for keychain remotes
1
From the [Home Network] app home screen, tap [Settings]
®
[Device Profiles]
®
[Keychain
Remote] .
2
Select the device that you want to change settings for.
3
Change the settings as desired, and then tap [OK] .
– [Name] : This setting determines the name assigned to the device.
– [Smart Button] : This setting determines the operation assigned to the remote’s "smart" button.
You can use the smart button to turn on a smart plug, or use it as a panic button that triggers the
alarm system.
Device profiles for keypads
1
From the [Home Network] app home screen, tap [Settings]
®
[Device Profiles]
®
[Keypad] .
2
Select the device that you want to change settings for.
3
Change the settings as desired.
–
[Location] : This setting determines the location name assigned to the device.
– [Name] : This setting determines the name assigned to the device.
4
Tap [Keypad Settings] .
5
Change the settings as desired, and then tap [OK] .
– [Show Arm Status] : This setting determines whether the touchpanel buttons light to indicate the
current arm mode.
– [Talking Notification]
*1
: This setting determines whether alarm and other events are announced
by the keypad.
– [Key Tone] : This setting determines whether key tones are heard when you enter numbers using
the touchpanel buttons.
6
Tap [OK] .
*1 [Talking Notification] is only available for the following hub model numbers.
– KX-HNB600
– KX-HNB600E
– KX-HNB600G
Device profiles for backup batteries
1
From the [Home Network] app home screen, tap [Settings]
®
[Device Profiles]
®
[Backup
Battery] .
2
Select the device that you want to change settings for.
R For information about [Power Outage Notification] , see “Configuring power outage notifications”,
Page 67.
3
Change the settings as desired, and then tap [OK] .
– [Connected Device] : Set this setting to match the device that is connected to the backup battery.
– [Name] : This setting determines the name assigned to the device.
– [Power Outage Detection] : This setting determines whether the backup battery detects power
outages.
– [Status LED] : This setting determines whether the device’s LED indicator lights or is disabled.
95
Using the app