Installation/Troubleshooting
22
9.
When "Setup complete" is displayed, and click [To Single Camera page].
•
The port number must be specified at the end of camera URL.
Using port 80:
http://(Cameraname).viewnetcam.com
or http://IP Address
Using any other port:
http://(Cameraname).viewnetcam.com:Port Number
or http://IP Address:Port Number
10.
When the Single Camera page is displayed, the setup is completed.
Note
• The banner is displayed only when Internet access is allowed on the
camera.
• To insure that the most current image is displayed, Internet Explorer should
be configured as follows. This will not have any negative result on normal
use.
•
When [Enable] was selected at
step 5
•
When [Disable] was selected
at step 5
1.
While viewing any website, Click [Tools]
[Internet Options].
2.
In the section "Temporary Internet Files", click [Settings] and check
[Every visit to the page].
Network Camera
Zoom
Focus
Program
Preset
Scan
Pan / Tilt
640
X
480
320
X
240
∗
Resolution
STD
-
+
Brightness
Open
Short
Output
Refresh Interval
Image Quality
Favor Clarity
Favor Motion
Standard
∗
Motion
Please click here when gray color screen displayed
Running in IPv4 mode.
Alarm
kxhcm280ait.book 22 ページ ２００５年３月９日 水曜日 午後１時２３分
