Installation/Troubleshooting
[For assistance, please call: 1-800-272-7033] 21
6.
To register with the "Viewnetcam.com FREE DDNS service", check [Register
with Viewnetcam.com] and click [Next].
Viewnetcam.com FREE DDNS service
See page 23 for Viewnetcam.com information. For detailed information,
access at
http://www.viewnetcam.com
.
•
If you have multiple cameras, you can use Viewnetcam.com service
registering it only for a camera.
•
If you select [Disable], skip to step 9.
7.
The Enter Network Password window is displayed, and enter the user name
and password that were set, and click [OK].
8.
After a while, the "Viewnetcam.com FREE DDNS service" website is
displayed. Follow the displayed instructions for registration.
•
If the message "Failed to configure the router's Port Forwarding by UPnP"
is displayed, your router may not support UPnP™ or UPnP™ is not
enabled. Enable your router's UPnP™ or set Port Forwarding manually
following the router's manual and try Automatic Setup again. For more
information about setting up a router, refer to the Panasonic Network
Camera support website at
http://panasonic.co.jp/pcc/products/en/
netwkcam/
.
•
If the message "Failed to register with Viewnetcam.com." is displayed,
confirm that the router is connected to the Internet.
kxhcm280ait.book 21 ページ ２００５年３月９日 水曜日 午後１時２３分
