57
Receiving Faxes
Pager call - when the unit receives a fax or
!
voice message
!
This feature allows your unit to call your pager when your unit receives a fax document or an
incoming voice message.
1
Press
.
Display:
2
Press
, then
.
3
Press
or
to select “ON”.
●
If this feature is not required, select “OFF”.
4
Press
.
5
Enter your pager number up to 30 digits.
Example:
6
Press
.
7
Enter your pager access code up to 10 digits
if required.
Example:
8
Press
.
●
The default code 07734 will show “Hello!”
on your pager.
●
If you want to change this message, enter
your message up to 30 digits.
9
Press
.
●
The unit will dial the stored number.
PAGER TEST
SET
MSG.=07734
SET
PIN=12345678
PIN=
SET
NO.=12025551234
NO.=
SET
PAGER CALL
MODE=ON
[±]
PAGER CALL
MODE=OFF
[±]
7 0
SYSTEM SET UP
PRESS NAVI.[
I H
]
MENU
SET
MENU
DIGITAL SP-PHONE
Note:
●
If you have subscribed to a Caller ID service,
instead of the message you entered in
step 8, your pager will display the caller’s
telephone number, followed by “11” or “22”.
11: When your unit receives a voice message.
22: When your unit receives a fax document.
●
If you have not entered a message in step 8,
your pager will only display “11” or “22”.
10
Check that your pager received
the pager test call.
11
Press
.
DIGITAL SP-PHONE
