Panasonic KX-FP701FX Operating Instructions Manual Download Page 48

Page: 48 / 56

9. Maintenance

9.4 Thermal head cleaning

If smudges or black/white lines appear on a
copied/received document, check whether there is dust
on the thermal head. Clean the thermal head to remove
the dust.

Disconnect the power cord and the telephone line
cord.

Open the front cover by pulling up the centre part.

Release the back cover by pushing the green button
(

You can also release the back cover by pushing
in the green lever (

Open the back cover. Remove the ink film (

Clean the thermal head (

) with a cloth moistened

with isopropyl rubbing alcohol, and let it dry
thoroughly.

Caution:

To prevent a malfunction due to static
electricity, do not use a dry cloth and do not
touch the thermal head directly.

Re-install the ink film and close the covers (see step
4 to 7 on page 10).

Insert the recording paper gently (page 12).

Connect the power cord and the telephone line cord.

FP701FX-PFQX2792ZA-en.book Page 48 Friday, July 13, 2007 3:34 PM

Summary of Contents for KX-FP701FX

























































Search results

Summary of Contents for KX-FP701FX

Reviews:

Related manuals for KX-FP701FX

Brands by name

Popular brands

Panasonic KX-FP701FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FP701FX

Reviews:

Related manuals for KX-FP701FX

Brands by name

Popular brands