1. Introduction and Installation
12
1.5.2 Replacing the ink film
The included film roll is a starter ink film. To
ensure that the unit operates properly, we
recommend the use of Panasonic replacement
film. See page 8 for accessory information.
L
We cannot be responsible for any damage to
the unit or degradation of print quality which
may occur from the use of non-Panasonic
replacement film.
Important:
L
Remove the recording paper and the
paper tray beforehand, or the paper may
misfeed or jam.
1
Open the covers (see steps 1 to 3 on page
10).
2
Remove the used core (
1
) and used ink film
(
2
).
3
Remove the stoppers (
1
) and tags (
2
) from
the new ink film (
3
).
4
Insert the ink film and close the covers (see
steps 4 to 7 on page 10).
5
Install the paper tray (page 12), then insert
the recording paper (page 13).
1.6 Handset cord
Connect the handset cord (
1
).
1.7 Paper tray
Insert the tabs (
1
) on the paper tray (
2
) into the
slots on the back of the unit (
3
).
1
2
2
1
1
3
1
2
3
1
FP143-148RU_en.book Page 12 Thursday, October 30, 2003 11:55 AM
