Panasonic KX-FP148RU Operating Instructions Manual Download

Page: 63 / 74

8. Help

Cleaning

8.6 Recording paper
feeder cleaning

Clean the recording paper feeder when:
–

The recording paper frequently misfeeds.

Important:

Remove the recording paper and the
paper tray beforehand, or the paper may
misfeed or jam.

Disconnect the power cord and the
telephone line cord.

Open the front cover by pulling up the centre
part.

Release the back cover by pushing the green
button (

Push the green button (

) to release the

back cover, then open the back cover.

Open the recording paper feeder cover (

Clean the recording paper feeder roller (

)

with a cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.

Caution:

Do not use paper products, such as
paper towels or tissues.

Close the covers (see steps 8 and 9 on page
59).

Install the paper tray (page 12), then insert
the recording paper (page 13).

Connect the power cord and the telephone
line cord.

FP143-148RU_en.book Page 61 Thursday, October 30, 2003 11:55 AM

Summary of Contents for KX-FP148RU











































































Search results

Summary of Contents for KX-FP148RU

Reviews:

Related manuals for KX-FP148RU

Brands by name

Popular brands

Panasonic KX-FP148RU, Operating Instructions Manual

Search results

Summary of Contents for KX-FP148RU

Reviews:

Related manuals for KX-FP148RU

Brands by name

Popular brands