Panasonic KX-FP145C Operating Instructions Manual Download Page 70

Page: 70 / 82

9. Help

Caution:

Do not use paper products, such as
paper towels or tissues.

Close the front cover securely.

Connect the power cord and the telephone
line cord.

9.8 Thermal head cleaning

If smudges or black/white lines appear on a
copied/received document, check whether there
is dust on the thermal head. Clean the thermal
head to remove the dust.

Important:

Remove the recording paper and the
paper tray beforehand, or the paper may
misfeed or jam.

Disconnect the power cord and the
telephone line cord.

Open the front cover by pulling up the centre
part.

Release the back cover by pushing the green
button (

Open the back cover.

FP145C_en.book Page 68 Thursday, March 11, 2004 11:00 AM

Summary of Contents for KX-FP145C



















































































Search results

Summary of Contents for KX-FP145C

Reviews:

Related manuals for KX-FP145C

Brands by name

Popular brands

Panasonic KX-FP145C, Operating Instructions Manual

Search results

Summary of Contents for KX-FP145C

Reviews:

Related manuals for KX-FP145C

Brands by name

Popular brands