Panasonic KX-FP145C, Operating Instructions Manual

Page: 56 / 82

8. Programmable Features
54
Code #48: Selecting the language
LANGUAGE
=ENGLISH [
±
]
The voice guidance, display and reports will be in
the selected language.
“
ENGLISH
” (default): English is used.
“
FRENCH
”: French is used.
Code #51: Setting the mailbox 1 password
BOX1 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 1.
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
5
}{
1
}
.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L
The default ID is “
555
”.
4. Press
{
SET
}
.
5. Press
{
MENU
}
.
Code #52: Setting the mailbox 2 password
BOX2 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 2.
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
5
}{
2
}
.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L
The default ID is “
555
”.
4. Press
{
SET
}
.
5. Press
{
MENU
}
.
Code #54: Changing the recording time for
your TAM/FAX greeting message
GREETING TIME
=16s [
±
]
“
16s
” (default): Maximum recording time is 16
seconds.
“
60s
”: Maximum recording time is 60 seconds.
See page 42 for details.
Code #55: Greeting message for mailbox 1
BOX1 GREETING
CHECK [
±
]
See page 46 for details.
Code #56: Greeting message for mailbox 2
BOX2 GREETING
CHECK [
±
]
See page 46 for details.
Code #60: Setting the message transfer
MESSAGE TRANSFER
=OFF [
±
]
To transfer recorded incoming messages to
another telephone (page 48), activate this
feature and program the transfer telephone
number.
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
6
}{
0
}
.
3. Press
{A}
or
{B}
repeatedly to select “
ON
”.
4. Press
{
SET
}
.
5. Enter the transfer telephone number.
6. Press
{
SET
}
.
7. Press
{
MENU
}
.
Code #61: Checking, recording or erasing the
transfer greeting message
TRNS-GREETING
CHECK [
±
]
See page 48 for details.
Code #67: Setting the incoming message
monitor
ICM MONITOR
=ON [
±
]
To hear an incoming message (ICM) from the
speaker when the answering machine is
recording the message.
“
ON
” (default): You can monitor the incoming
message.
“
OFF
”: Deactivates this feature.
Code #70: Calling your pager
PAGER CALL
=OFF [
±
]
See page 49 for details.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON [
±
]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones:
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party’s machine.
“
ON
” (default): You will hear connecting tones.
FP145C_en.book Page 54 Thursday, March 11, 2004 11:00 AM