Panasonic KX-FM330GR, Service Manual

Page: 10 / 264

2.5. SERVICE FUNCTION TABLE
Change from original pages 104~105 (2.4.4. SERVICE FUNCTION TABLE)
Code Function Set Value Effective Range Default Remarks
501 Pause time set X 100 ms. 001~600 150
502 Flash time set X 10 ms. 01~99 2
510 VOX time 1:6sec 2:4sec 1, 2 2 --------
520 CED frequency select 1:2100 Hz 2:1100 Hz 1, 2 1 See the Symptom/
Countermeasure Table for long
distance and international calls in
2.3.3.3.1. Defective facsimile
section.
521 International mode select 1:ON 2:OFF 1, 2 1 See the Symptom/
Countermeasure Table for long
distance and international calls in
2.3.3.3.1. Defective facsimile
section.
522 Auto standby select 1:ON 2:OFF 1, 2 1 The resolution reverts to the
default when transmission is
complete.
523 Receive equalizer select 1:0km 2:1.8km
3:3.6km 4:7.2km 1~4 1 When the telephone station is far
from the unit or reception cannot
be performed correctly, adjust
accordingly.
524 Transmission equalizer select 1:0km 2:1.8km
3:3.6km 4:7.2km 1~4 1 When the telephone station is far
from the unit or transmission
cannot be performed correctly,
adjust accordingly.
533 Setting the number of times that
message transfer is redialed 00~99 00~99 03 Selects the number of times that
message transfer is redialed (not
including the first dialing).
534 Setting the message transfer /
pager call redial interval 000~999 000~999 065 Sets the interval of message
transfer / pager call redial.
550 Memory clear: To reset the value to the default one, except the top margin (853)and left
margin (854). "START" input.
551 ROM check "START" input.
552 DTMF single tone test 1:ON 2:OFF 1, 2 2 See 2.5. TEST FUNCTIONS.
553 Monitor on FAX communication
select 1: OFF 2:PHASE B
3:ALL phases 1~3 1
554 Modem test See 2.5. TEST FUNCTIONS.
555 Scan check See 2.5. TEST FUNCTIONS.
556 Motor test 00 See 2.5. TEST FUNCTIONS.
557 LED test See 2.5. TEST FUNCTIONS.
558 LCD test See 2.5. TEST FUNCTIONS.
559 Paper jam detection select 1:ON 2:OFF 1, 2 1 See 2.2.1. Paper Jam.
561 KEY test See 2.5. TEST FUNCTIONS.
571 ITS auto redial time set X number of times 00~99 03 Selects the number of times that
ITS is redialed (not including the
first dial).
572 ITS auto redial line disconnection
time set X second 001~999 065 Sets the interval of ITS redialing.
573 Remote turn-on ring number set X number of rings 01~99 15 Sets the number of rings before
the unit starts to receive a
document in the TEL mode.
576 K break detect 1:ON 2:OFF 1, 2 1 --------
580 TAM continuous tone detection 1:ON 2:OFF 1, 2 1 ON: STOP TAM operation when
Dial tone, etc. are detected.
590 FAX auto redial time set X number of times 00~99 03 Selects the number of redial times
during FAX communication (not
including the first dial).
591 FAX auto redial time disconnection
time set X second 001~999 065 Sets the FAX redial interval during
FAX communication.
592 CNG transmit select 1:OFF 2:ALL 3:AUTO 1~3 2 Lets you select the CNG output
during FAX transmission. ALL:
CNG is output at phase A. AUTO:
CNG is output only when automatic
dialing is performed. OFF: CNG is
not output at phase A.
593 Time between CED and 300bps 1: 75 ms. 2:500 ms.
3:1 sec 1~3 1 See the Symptom/Countermeasure
Table for long distance and
international calls in 2.3.3.3.1.
Defective facsimile section.
10
KX-FM330GR