Panasonic KX-FM330GR, Service Manual

Page: 68 / 264

2.2. USER RECOVERABLE ERRORS
If the unit detects a problem, one or more of the following messages will appear on the display.
• There is something wrong with the modem circuit. Contact our service parsonal.
CALL SERVICE
DISPLAY MESSAGE CAUSE AND REMEDY
• There
[This error is displayed when the thermal head does not warm up. Check the thermistor
on the thermal head and connector lead. (for technicians)]
is something wrong with the unit. Contact our service personnel.
• The cover is open. Close it.
• The document is not fed into the unit properly. Reinsert the document. If misfeeding
occurs frequently, clean the document feeder rollers and try again.
If the problem remains, adjust the feeder pressure.
• Memory
[The backup battery on the top of the digital board may be low or dead, so check it.]
(telephone numbers, parameters, etc.) has been erased. Re-program.
• The recording paper is not fed into the unit properly or has jammed near the recording
paper
the message. entrance. Clear the jammed paper
Do not install folded or heavily curled paper in the paper tray.
• The film is empty. Replace the film cartridge.
¥ The film is slack. Tighten it and install again.
• The remaining film can print about 10 pages of A4 size documents. Prepare a new
film or film cartridge.
• Memory is full of received documents due to lack of recording paper or a recording
paper jam, etc. Install paper or clear the jammed paper.
• When performing memory transmission, the document being stored exceeds the
memory capacity of the unit. Transmit the entire document using manual or automatic
transmission.
CHECK COVER
CHECK DOCUMENT
CHECK MEMORY
CHECK PAPER
FAX IN MEMORY
FILM EMPTY
FILM NEAR EMPTY
• The free starter film is empty. Replace the film or film cartridge.
FREE FILM EMPTY
MODEM ERROR
FAX MEMORY FULL
and press to clear
START/SET/COPY
( S e r v i c e N o t w e n d )
( D e c k e l p r ü f e n )
( V o r l a g e p r ü f e n )
( S p e i c h e r p r ü f e n )
( P r ü f e P a p i e r )
DIRECTORY FULL
( J o g - D i a l v o l l )
( F a x i m S p e i c h e r )
( S p e i c h e r v o l l )
( F i l m e r s c h ö p f t )
( N ä h e F i l m e n d e )
( F i l m l e e r )
( M o d e m f e h l e r )
• The recording paper set lever is released. Push it back to set the lever.
CHECK LEVER
( P r ü f e n H e b e l )
• The film cartridge is not installed properly. Reinsert it correctly.
CHECK FILM
( F i l m p r ü f e n )
• T h e recording paper is not installed or the unit has run out of paper. Install paper and
press START/SET/COPY to clear the message.
• There is no space to store new stations in the EASY DIAL directory.
Edit or erase unnecessary stations.
• The unit has a document in memory. See the other displayed message
instructions to print out the document.
Note:
• The explanations given in the [ ] are for servicemen only.
• Words in brackets ( ) are German. A translated version for each market is available with this model series.
26
KX-FP320G / KX-FM330G