Panasonic KX-FLM652CX, Service Manual

Page: 77 / 286

Code Function Set Value Default Remote Setting
558 LCD test --------- --------- NG
561 Key test --------- --------- NG
570 Break % select 1:61% / 2:67% 61% OK
571 ITS auto redial time set 00~99 0 OK
572 ITS auto redial line disconnection time set 001~999sec 65 OK
573 Remote turn-on ring number 00~99 10 OK
574 DIAL TONE detection ON/OFF selection 1:ON / 2:OFF OFF NG
590 FAX auto redial time set 00~99 05 OK
591 FAX auto redial line disconnection time set 001~999sec 065 OK
592 CNG transmit select 1:OFF / 2:ALL / 3:AUTO ALL OK
593 Time between CED and 300bps 1:75ms / 2:500ms / 3:1sec 75ms OK
594 Overseas DIS detection select 1:1st / 2:2nd 1st OK
595 Receive error limit value set 1:5% / 2:10% / 3:15% / 4:20% 10% OK
596 Transmit level set -15~00dBm (00~ -15dBm) 10 OK
598 Receiving Sensitivity 20~48 43 OK
599 ECM Frame size 1:256 / 2:64 256byte OK
628 H.V.P.S check --------- --------- NG
639 LSU test --------- --------- NG
651 White system program into the Flash ROM --------- --------- NG
655 Cause distinction code of call service 3 --------- --------- NG
710 Memory clear except History data --------- --------- NG
717 Transmit speed select 1: 14400bps / 2:12000bps / 3:9600bps
/ 4:7200bps / 5:4800bps / 6:2400bps 14400bps OK
718 Receive speed select 1: 14400bps / 2:12000bps / 3:9600bps
/ 4:7200bps / 5:4800bps / 6:2400bps 14400bps OK
721 Pause tone detect 1:ON / 2:OFF OFF OK
722 Redial tone detect 1:ON / 2:OFF OFF OK
763 CNG detect time for friendly reception 1:10s / 2:20s / 3:30s 30s OK
771 T1 timer 1:35s / 2:60s 35s OK
774 T4 timer 00~99 × 100msec 0 OK
815 Sensor test --------- --------- NG
852 Print test pattern --------- --------- NG
853 Top margin 1~5 × 0.5mm 4 OK
854 Left margin 1~7 × 0.677mm 1 OK
874 DTMF ON time 060~200msec 90 OK
875 DTMF OFF time 060~200msec 90 OK
880 History list 1:Start --------- NG
881 Journal 2 --------- --------- NG
882 Journal 3 --------- --------- NG
991 Setup list 1:Start --------- OK
994 Journal list 1:Start --------- OK
995 Journal 2 list 1:Start --------- OK
996 Journal 3 list 1:Start --------- OK
998 History list 1:Start --------- OK
999 Service list 1:Start --------- OK
OK means “can set”.
NG means “can not set”.
Note:
Refer to SERVICE FUNCTION TABLE (P.66) for descriptions of the individual codes.
Example:
If you want to set value in the “401 PRINT CONFIRMATION REPORT”, press the dial key number 1, 2 or 3 corresponding to
the Set Value you want to select. (1:ERROR/2:ON/3:OFF)
77
KX-FLM652CX