Panasonic KX-FLM652CX, Service Manual

Page: 66 / 286

6.2.3. SERVICE FUNCTION TABLE
Code Function Set Value Effective
Range
Default Remarks
501 Pause time set X 100 msec 001~600 030 ----------
502 Flash time X 10 ms 01~99 70 ----------
503 Dial speed select 1:10 pps
2:20 pps 1, 2 1 ----------
507 Transmit speed select 0: Disable
1: 33.6
2: 31.2
3: 28.8
4: 26.4
5: 24.0
6: 21.6
7: 19.2
8: 16.8 0~8 1
----------
508 Receive speed select 0: Disable
1: 33.6
2: 31.2
3: 28.8
4: 26.4
5: 24.0
6: 21.6
7: 19.2
8: 16.8 0~8 1
----------
514 Bell signal detect time X 100msec 1~99 6 ----------
520 CED frequency select 1:2100 Hz
2:1100 Hz 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.126).
521 International mode select 1:ON 2:OFF 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.126).
522 Auto standby select 1:ON 2:OFF 1, 2 1 The resolution reverts to the default when
transmission is complete.
523 Receive equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 Set RX equalizer to automatic mode.
524 Transmission equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 Set TX equalizer to automatic mode.
527 V.8 function select 1:OFF 2:ON 1, 2 2 Sets whether to select V.8 function or not.
529 Memory clear for Call Service
550 Memory clear Refer to Memory Clear Specification (P.68).
551 ROM check See (P.69).
552 DTMF single tone test 1:ON 2:OFF 1, 2 2 See (P.69).
553 Monitor on FAX communication
select 1:OFF
2:PHASE B
3:ALL 1~3 1 Sets whether to monitor the line signal with the
unit´s speaker during FAX communication or not.
554 Modem test See (P.69).
555 Scan check See (P.69).
556 Motor test 0 See (P.69).
557 LED test See (P.69).
558 LCD test See (P.69).
561 KEY test See (P.69).
570 BREAK % select 1:61% 2:67% 1, 2 1 Sets the % break of pulse dialing according PBX.
571 ITS auto redial time set X number of
times 00~99 00 Selects the number of times that ITS is redialed
(not including the first dial).
572 ITS auto redial line disconnection
time set X second 001~999 065 Sets the interval of ITS redialing.
573 Remote turn-on ring number set X number of
rings 01~99 10 Sets the number of rings before the unit starts to
operate TAM in the TEL mode.
574 DIAL TONE detection ON/OFF
selection 1:ON / 2:OFF 1, 2 2 Sets whether to dial the Automatic dial number
before detecting dial tone or after detecting
dialtone.
590 FAX auto redial time set X number of
times 00~99 05 Selects the number of redial times during FAX
communication (not including the first dial).
591 FAX auto redial time disconnection
time set X second 001~999 065 Sets the FAX redial interval during FAX
communication.
592 CNG transmit select 1:OFF
2:ALL
3:AUTO 1~3 2 Lets you select the CNG output during FAX
transmission. ALL: CNG is output at phase A.
AUTO: CNG is output only when automatic dialing
is performed. OFF: CNG is not output at phase A.
Refer to (P.119).
66
KX-FLM652CX