8. Programmable Features
55
8.3 Advanced features
Feature/Code
Selection
Printing a confirmation
report
{#}{
4
}{
0
}{
1
}
To print a confirmation report for fax transmission results (page 31).
{
0
}
“
OFF
”
: Confirmation reports will not be printed.
{
1
}
“
ON
”
: A confirmation report will be printed after every transmission.
{
2
}
“
ERROR
”
(default): A confirmation report will be printed only when
fax transmission fails.
Setting the journal report
to print automatically
{#}{
4
}{
0
}{
2
}
{
0
}
“
OFF
”
: The unit will not print a journal report, but will keep a record
of the last 30 fax transmissions and receptions.
{
1
}
“
ON
”
(default): The unit will print a journal report automatically after
every 30 new fax transmissions and receptions (page 31).
Sending documents
overseas
{#}{
4
}{
1
}{
1
}
If you cannot send a fax overseas even if the number is correct and the
line is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission
speed.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
NEXT FAX
”
: This setting is effective only for the next attempted
fax transmission. After transmission, the unit will return to the previous
setting.
{
2
}
“
ERROR
”
(default): When the previous fax transmission fails and
you wish to re-send the document.
Note:
L
This feature is not available for broadcast transmission.
L
Calling charges may be higher than usual.
FLM651-PFQX2292ZA-en.book Page 55 Monday, September 12, 2005 2:22 PM
