Panasonic KX-FLM651 - Laser Fax, PC-Printer Operating Instructions Manual Download Page 72

Page: 72 / 90

9. Help

For assistance, please visit http://www.panasonic.com/consumersupport

Firmly press down the toner cartridge to
snap into position.

Turn the two levers (

) on the toner

cartridge firmly.

Make sure that the triangles (

) match, to

install the toner cartridge correctly.

If the lower glass (

) is dirty, clean it with

a soft and dry cloth.

Install the drum and toner unit (

) by holding

the tabs.

Close the front cover (

) by pushing down

on both sides, until locked.

While the unit displays

“

PLEASE WAIT

”

do not open the front cover, or disconnect
the power cord.

Waste disposal method

Waste material should be disposed of under
conditions which meet all national and local
environmental regulations.

FLM651-PFQX2292ZA-en.book Page 70 Monday, September 12, 2005 2:22 PM

Summary of Contents for KX-FLM651 - Laser Fax, PC-Printer



























































































Search results

Summary of Contents for KX-FLM651 - Laser Fax, PC-Printer

Reviews:

Related manuals for KX-FLM651 - Laser Fax, PC-Printer

Brands by name

Popular brands

Panasonic KX-FLM651 - Laser Fax, PC-Printer, Operating Instructions Manual

Search results

Summary of Contents for KX-FLM651 - Laser Fax, PC-Printer

Reviews:

Related manuals for KX-FLM651 - Laser Fax, PC-Printer

Brands by name

Popular brands