Panasonic KX-FLB851E Operating Instructions Manual Download | Manualshive

Page: 80 / 110

background image

8. Help

78

8.3.5 Copying

8.3.6 Using an answering machine

Problem

Cause & Solution

The unit will not make a
copy.

L

You cannot make a copy during programming. Make the copy after
programming.

L

The document was not fed into the unit properly. Re-insert the
document.

L

Recording paper is not installed or the unit has run out of paper.
Install paper (page 18).

A black line, a white line or
smudge appears on the
copied document.

L

The glass or rollers are dirty with correction fluid, etc. Clean them
(page 88, 92). Please do not insert a document before correction
fluid has dried completely.

The printing quality is
poor.

Original

Copy

L

Some paper has instructions recommending which side to print on.
Try turning the paper over.

L

You may have used paper with a cotton and/or fibre content that is
over 20%, such as letterhead or resume paper.

L

The remaining toner is low. Replace the toner cartridge (page 81).

L

To check the drum life and quality, please print the printer test list
(page 93). If printing quality is still poor, replace the toner cartridge
and drum unit.

L

The toner save mode of feature #482 is ON (page 64).

Problem

Cause & Solution

I cannot receive
documents automatically.

L

Your greeting message on the answering machine is too long.
Shorten the message. Record a message up to 10 seconds long.

L

The answering machine rings too many times. Set to 1 or 2 rings.

I cannot receive voice
messages.

L

Check if the answering machine is turned ON and connected to the
unit properly (page 39).

L

Set the number of rings on the answering machine to 1 or 2.

I cannot retrieve recorded
voice messages on the
answering machine from
a remote location.

L

You did not program your remote access code into your unit
correctly. Program the same code that is programmed on the
answering machine on the unit with feature #322 (page 63).

I pressed the remote
access code to access the
answering machine
remotely, but the line was
disconnected.

L

The code may include “#” which is used for certain features
provided by telephone companies. Change the code on the
answering machine to another number which does not include “#”.
Also change the code of the unit with feature #322 (page 63).

Callers complain that they
cannot send a document.

L

There is no room left in memory of your answering machine to
record voice messages. See the operating instructions of the
answering machine and erase unnecessary messages.

L

You set the answering machine to only give a greeting message.

A B C

FLB851E-PFQX2329ZA-en.book Page 78 Friday, December 16, 2005 3:12 PM

«
...
78
79
80
81
82
...
»

Summary of Contents for KX-FLB851E















































































































Reviews:

No comments

Related manuals for KX-FLB851E

Brand: Pallmann Pages: 36

Brand: LAVAZZA Pages: 32

Brand: Kärcher Pages: 15

Brand: Singer Pages: 25

Brand: Baby Lock Pages: 25

Brand: JUKI Pages: 4

Brand: JUKI Pages: 7

Brand: JUKI Pages: 18

Brand: JUKI Pages: 40

Brand: AEG Pages: 28

LAVAMAT 69470FL

Brand: AEG Pages: 28

Brand: Bosch Pages: 24

Brand: SunStar Pages: 21

Brand: SunStar Pages: 37

Brand: SunStar Pages: 50

Brand: Sealey Pages: 2

Brand: Singer Pages: 39

Brand: Riccar Pages: 79

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands