Panasonic KX-FLB851E, Operating Instructions Manual

Page: 48 / 110

5. Copy
46
2. Press
{V}
or
{^}
repeatedly to select the
desired contrast.
L
To make lighter, press
{V}
.
L
To make darker, press
{^}
.
Note:
L
You can save the previous contrast setting in
feature #462 (page 64).
To select the input tray and paper size
1. Press
{
PAPER TRAY
}
.
2. Press
{V}
or
{^}
repeatedly to select the
desired input tray.
–
“
IN TRAY #1
” : Paper input tray
– “
IN TRAY #2
” : Multi-purpose input tray
L
When the optional input tray is installed,
the following will be added to the settings.
– “
IN TRAY #3
” : Optional input tray
– “
IN TRAY #1#3
” : Paper input tray and
optional input tray
3. Press
{
<
}
or
{
>
}
repeatedly to select the
desired paper size.
–
“
LETTER
” : Letter size paper
– “
A4
” : A4 size paper
– “
LEGAL
” : Legal size paper
L
When the input tray is set to “
IN TRAY
#1
” or “
IN TRAY #1#3
” , you cannot
select “
LEGAL
” .
Note:
L
You can also set the input tray setting in
feature #460 (page 69).
L
You can also set the paper size in feature
#380 (page 64), #381 (page 64) or #382
(page 64). If the selected paper size of
#380 and #382 are not same,
“
IN TRAY
#1#3
” will not be displayed in this setting.
5.2.2 Using the scanner glass
L
Confirm that there are no documents in
the auto document feeder.
1
If the
{
COPY
}
light is OFF, turn it ON by
pressing
{
COPY
}
.
2
Set the original.
1. Open the document cover (
1
).
2. Place the document FACE DOWN on the
scanner glass, matching the top edge of
the document to the
l
mark on the unit.
3. Close the document cover.
L
If the original is a thick book, do not
close the document cover.
3
If necessary, change the following settings
according to the type of document.
L
To select the resolution, see page 45.
L
To select the contrast, see page 45.
L
To select the input tray and paper size,
see page 46.
4
If necessary, enter the number of copies (up
to 99).
5
Press
{
START
}
.
L
The unit will start copying.
6
After you finish copying, press
{
STOP
}
to
reset the settings you set in step 3.
To stop copying
Press
{
STOP
}
.
{
START
} {
COPY
}
1
{
STOP
}
FLB851E-PFQX2329ZA-en.book Page 46 Friday, December 16, 2005 3:12 PM