Panasonic KX-FLB851E Operating Instructions Manual Download

Page: 18 / 110

1. Introduction and Installation

Lift the cover release lever (

) and open the

top cover (

Important:

Close the multi-purpose input tray (

)

before opening the top cover.

If the lower glass (

) is dirty, clean it with

a soft and dry cloth.

Install the drum and toner unit (

) by holding

the tabs.

Make sure that the triangles (

) match to

install the drum and toner unit correctly.

Close the top cover, holding the cover
release lever (

). Then push down the right

centre edge, until locked.

Caution:

To prevent injuries, be careful not to
put your hands under the top cover.

Toner save feature

If you want to reduce toner consumption, set the
toner save setting to ON (feature #482 on page
64). The toner cartridge will last approximately
40 % longer. This feature may lower the print
quality.

FLB851E-PFQX2329ZA-en.book Page 16 Friday, December 16, 2005 3:12 PM

Summary of Contents for KX-FLB851E















































































































Search results

Summary of Contents for KX-FLB851E

Reviews:

Related manuals for KX-FLB851E

Brands by name

Popular brands

Panasonic KX-FLB851E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB851E

Reviews:

Related manuals for KX-FLB851E

Brands by name

Popular brands