8. Programmable Features
68
Note:
L
If the optional LAN board is not installed, the
computer connected to the unit by USB is
assigned as the ADMIN PC.
{#}{
5
}{
0
}{
0
}
LAN setting with a DHCP
server
DHCP
=ENABLED
[
V^
]
{
0
}
“
DISABLED
”
: Deactivates this feature.
{
1
}
“
ENABLED
”
(default): The following will be
allocated automatically using a DHCP (Dynamic
Host Configuration Protocol) server.
–
IP address
–
Subnet mask
–
Default gateway
{#}{
5
}{
0
}{
1
}
Setting the IP address for the
LAN connection
IP ADDRESS
PRESS SET
This feature is available when feature #500 is
deactivated. Enter the IP address of the unit on
the LAN using the dial keypad.
{#}{
5
}{
0
}{
2
}
Setting the Subnet mask for the
LAN connection
SUBNET MASK
PRESS SET
This feature is available when feature #500 is
deactivated. Enter the subnet mask of the
network on the LAN using the dial keypad.
{#}{
5
}{
0
}{
3
}
Setting the Default gateway for
the LAN connection
DEFAULT GATEWAY
PRESS SET
This feature is available when feature #500 is
deactivated. Enter the default gateway of the
network on the LAN using the dial keypad.
{#}{
5
}{
0
}{
7
}
Setting the machine name
MACHINE NAME
PRESS SET
Enter the name of the unit to recognize on the
LAN. If you change the name, assign the unique
name to avoid overlapping.
L
In order to recognize the unit on the LAN, the
default name of the unit is assigned
automatically based on the ID of the optional
LAN board.
FLB851-PFQX2175YA-en.book Page 68 Thursday, September 8, 2005 2:24 PM
