manualshive.com logo in svg

Panasonic KX-FLB851 - All-in-One Flatbed Laser Fax, Operating Instructions Manual, Page: 83 / 110

Share
Download
Panasonic KX-FLB851 - All-in-One Flatbed Laser Fax Operating Instructions Manual Download Page 83

9. Help

81

For assistance, please visit http://www.panasonic.com/consumersupport

9

Turn the two green levers (

1

) on the toner 

cartridge firmly.

10

Make sure that the triangles (

1

) match to 

install the toner cartridge correctly.

L

If the lower glass (

2

) is dirty, clean it with 

a soft and dry cloth.

11

Install the drum and toner unit (

1

) by holding 

the tabs.

L

Make sure that the triangles (

2

) match to 

install the drum and toner unit correctly.

12

Close the top cover, holding the cover 
release lever (

1

). Then push the left side 

(

2

) of the cover release lever firmly, until 

locked.

Caution:

L

To prevent injuries, be careful not to 
put your hands under the top cover.

Note:

L

While the unit displays 

“

PLEASE WAIT

”

, 

do not open the top cover, or turn the 
power switch OFF.

Waste disposal method

Waste material should be disposed of under 
conditions which meet all national and local 
environmental regulations.

1

1

1

2

1

2

1

2

FLB851-PFQX2175YA-en.book  Page 81  Thursday, September 8, 2005  2:24 PM

Summary of Contents for KX-FLB851 - All-in-One Flatbed Laser Fax















































































































Reviews:

No comments