9. Help
67
For assistance, please visit http://www.panasonic.com/consumersupport
9.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
Cause & Solution
“
CALL SERVICE
”
L
There is something wrong with the unit. Contact our service
personnel.
“
CARRIAGE ERROR
”
L
There is something wrong with the carriage sensor. Contact our
service personnel.
“
CHANGE DRUM
”
“
CHANGE SUPPLIES
”
L
There is something wrong with the drum unit. Replace the drum
unit and the toner cartridge (page 76).
“
CHECK DOCUMENT
”
L
The document was not fed into the unit properly. Re-insert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (page 87) and try again.
“
CHECK DRUM
”
L
The drum unit is not inserted properly. Re-insert it correctly (page
13).
“
CHECK MEMORY
”
L
The memory (telephone numbers, parameters, etc.) has been
erased. Re-program.
“
CHECK PICK UP
INPUT TRAY #1
”
L
Recording paper was not fed into the unit properly. Re-insert the
recording paper (page 82).
Note:
L
“
#1
”
: Paper input tray
L
“
#2
”
: Manual input tray
“
CLOSE ADF COVER
”
L
The ADF cover is open. Close it.
“
DIRECTORY FULL
”
L
There is no space to store new items in navigator directory. Erase
unnecessary items (page 32).
“
DRUM LIFE LOW
REPLACE SOON
”
L
The drum life is near to an end. Replace the drum unit as soon as
possible (page 76).
“
FAX IN MEMORY
”
L
The unit has a document in memory. See the other displayed
message instructions to print out the document. For fax memory
capacity, see page 90.
L
If feature #442 is set to
“
ALWAYS
”
(page 64), check the connection
between the computer and the unit.
“
KEEP COPYING
”
L
Copying has stopped due to a lack of recording paper or
misfeeding of recording paper. See the other displayed message
instructions to continue copying.
“
LOW TEMP.
”
L
The inside of the unit is extremely cold and cannot be operated.
Use the unit in a warmer area. While the unit cannot be operated,
the received documents are temporarily stored into the memory,
and will be printed out automatically when the unit warms up.
“
MEMORY FULL
”
L
When performing memory transmission, the document being
stored exceeded the memory capacity of the unit. Send the entire
document manually.
L
When making a copy, the document being stored exceeded the
memory capacity of the unit. Press
{
STOP
}
to clear the message.
Divide the document into sections.
FLB811-PFQX2307ZB-en.book Page 67 Thursday, February 16, 2006 3:57 PM
