Panasonic KX-FL613HK Operating Instructions Manual Download Page 56

Page: 56 / 70

8. Help

Firmly press down the toner cartridge to
snap into position.

Turn the two levers (

) on the toner

cartridge firmly.

Make sure that the triangles (

) match, to

install the toner cartridge correctly.

If the lower glass (

) is dirty, clean it with

a soft and dry cloth.

Install the drum and toner unit (

) by holding

the tabs.

Close the front cover (

) by pushing down

on both sides, until locked.

While the unit displays

“

PLEASE WAIT

”

do not open the front cover, or disconnect
the power cord.

Waste disposal method

Waste material should be disposed of under
conditions which meet all national and local
environmental regulations.

Jams

8.5 Recording paper jam

8.5.1 When the recording paper
has jammed in the unit

The display will show the following.

PAPER JAMMED

FL613HK-PFQX2156ZA-en.book Page 54 Friday, January 7, 2005 5:54 PM

Summary of Contents for KX-FL613HK







































































Search results

Summary of Contents for KX-FL613HK

Reviews:

Related manuals for KX-FL613HK

Brands by name

Popular brands

Panasonic KX-FL613HK, Operating Instructions Manual

Search results

Summary of Contents for KX-FL613HK

Reviews:

Related manuals for KX-FL613HK

Brands by name

Popular brands