Panasonic KX-FL613HK, Operating Instructions Manual

Page: 47 / 70

8. Help
45
8 Help Error Messages
8.1 Error messages –
Reports
If a problem occurs during fax transmission or
reception, one of the following messages will be
printed on the sending and journal reports (page
28).
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)
L
A transmission or reception error occurred.
Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)
L
A line problem occurred. Connect the
telephone line cord to a different jack and try
again.
L
An overseas transmission error occurred. Try
using the overseas mode (feature #23, page
41).
DOCUMENT JAMMED
L
The document is jammed. Remove the
jammed document (page 57).
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)
L
A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
MEMORY FULL
L
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 13)
or clear the jammed paper (page 54).
NO DOCUMENT
L
The document was not fed into the unit
properly. Re-insert it and try again.
OTHER FAX NOT RESPONDING
L
The other party’s fax machine is busy or has
run out of recording paper. Try again.
L
The other party’s fax machine rings too many
times. Send the fax manually (page 27).
L
The other party’s machine is not a fax
machine. Check with the other party.
L
The number you dialled is not in service.
PRESSED THE STOP KEY
L {
STOP
}
was pressed and fax communication
was cancelled.
THE COVER WAS OPENED
L
The front cover was opened. Close it and try
again.
OK
L
Fax transmission or reception was
successful.
8.2 Error messages –
Display
If the unit detects a problem, one or more of the
following messages will appear on the display.
—————————————————————
CALL SERVICE
L
There is something wrong with the unit.
Contact our service personnel.
—————————————————————
CHANGE DRUM
b
CHANGE SUPPLIES
L
There is something wrong with the drum unit.
Replace the drum unit and the toner cartridge
(page 52).
—————————————————————
CHECK DOCUMENT
L
The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 58) and try
again.
—————————————————————
CHECK DRUM
L
The drum unit is not inserted properly. Re-
insert it correctly (page 10).
—————————————————————
CHECK MEMORY
L
The memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.
—————————————————————
COVER OPEN
L
The front cover is open. Close it.
—————————————————————
DIRECTORY FULL
FL613HK-PFQX2156ZA-en.book Page 45 Friday, January 7, 2005 5:54 PM