Panasonic KX-FL613HK, Operating Instructions Manual

Page: 43 / 70

7. Programmable Features
41
7.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON [
±
]
“
ON
” (default): The unit will print a journal report
automatically after every 30 new fax
transmissions and receptions (page 28).
“
OFF
” : The unit will not print a journal report, but
will keep a record of the last 30 fax transmissions
and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR [
±
]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
“
NEXT FAX
” : This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“
ERROR
” (default): When the previous fax
transmission fails and you wish to re-send the
document.
“
OFF
” : Deactivates this feature.
Note:
L
This feature is not available for broadcast
transmission.
L
Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF [
±
]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. If necessary, press
{
RESOLUTION
}
repeatedly to select the desired resolution
(page 27).
3. Press
{
MENU
}
.
4. Press
{#}
then
{
2
}{
5
}
.
5. Press
{A}
or
{B}
repeatedly to select “
ON
” .
6. Press
{
SET
}
.
7. Enter the fax number.
8. Press
{
SET
}
.
9. Enter the transmission start time.
L
Press
{*}
repeatedly to select “
AM
” or
“
PM
” .
10. Press
{
SET
}
.
L
To cancel after programming, press
{
STOP
}
then
{
SET
}
.
Code #26: Setting the Caller ID list to be
printed automatically
AUTO CALL. LIST
=ON [
±
]
“
ON
” (default): The unit will print the Caller ID list
automatically after every 30 new calls (page 24).
“
OFF
” : The unit will not print the Caller ID list, but
will keep records of the information for the last 30
callers.
Code #27: Setting the black list function
BLACK LIST
=OFF [
±
]
See page 35 for details.
Code #30: Changing the silent fax
recognition ring setting
SILENT FAX RING
RINGS=3 [
±
]
To change the number of times the unit rings
while in TEL/FAX mode. You can select
“
3
”
(default), “
4
” , “
5
” , “
6
” , “
7
” , “
8
” or “
9
” . See
page 33 for details.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
=OFF [
±
]
See page 36 for details.
Code #37: Receiving other size documents
AUTO REDUCTION
=ON [
±
]
To receive a fax document that is longer than
your recording paper.
“
ON
” (default): The unit will fit received
documents onto your recording paper.
“
OFF
” : The unit will print the original size.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL [
±
]
“
NORMAL
” (default): For normal contrast.
“
DARKER
” : Used when the display contrast is too
light.
FL613HK-PFQX2156ZA-en.book Page 41 Friday, January 7, 2005 5:54 PM