Panasonic KX-FC268FX Operating Instructions Manual Download

Page: 12 / 72

Document exit

Speaker

Green button (Back cover release button)

Back cover

Removing the shipping tape

* The pictured model is KX-FC278.

Note:

Shipping tape positions are subject to change without
notice.

1.6.2 Cordless handset

Charge indicator
Ringer indicator

Speaker

Receiver

Microphone

Charge contacts

1.7 Ink film

The included film roll is a starter ink film.

Open the front cover.

Release the back cover by pushing the green button
(

Open the back cover.

Insert the blue gear of the ink film roll into the front
left slot of the unit (

) and the white gear of the ink

film roll into the rear left slot of the unit (

The ink film is safe to touch and will not rub off on
your hands like carbon paper.

1. Introduction and Installation

Summary of Contents for KX-FC268FX









































































Search results

Summary of Contents for KX-FC268FX

Reviews:

Related manuals for KX-FC268FX

Brands by name

Popular brands

Panasonic KX-FC268FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FC268FX

Reviews:

Related manuals for KX-FC268FX

Brands by name

Popular brands