manualshive.com logo in svg

Panasonic KX-FC268FX, Operating Instructions Manual

Share
Download
Panasonic KX-FC268FX Operating Instructions Manual Download Page 44

Feature

Selection

Setting the connecting tone

MBNM

7

NM

6

N

If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use those
tones to confirm the status of the other party’s machine.

M

0

N

 

“

OFF

”

: Deactivates this feature.

M

1

N

 

“

ON

”

 (default): You will hear connecting tones.

Note:

R

If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.

R

The connecting tone volume cannot be adjusted.

Changing the receiving mode
in the auto answer setting

MBNM

7

NM

7

N

M

1

N

 

“

TAM/FAX

”

 (default): Telephone Answering Machine/Fax mode (page 31)

M

2

N

 

“

FAX ONLY

”

: Fax only mode (page 32)

Changing the TEL/FAX
delayed ring count

MBNM

7

NM

8

N

If you use an extension telephone when this unit is in TEL/FAX mode, select
the desired number of times the extension telephone rings before the unit
answers the call.

M

1

N

 

“

1

”

, 

M

2

N

 

“

2

”

 (default), 

M

3

N

 

“

3

”

, 

M

4

N

 

“

4

”

, 

M

5

N

 

“

5

”

, 

M

6

N

 

“

6

”

, 

M

7

N

 

“

7

”

, 

M

8

N

“

8

”

, 

M

9

N

 

“

9

”

See page 31 for details.

Resetting advanced features
to their default settings

MBNM

8

NM

0

N

M

0

N

 

“

NO

”

 (default)

M

1

N

 

“

YES

”

To reset the advanced features:

1.

M

MENU

N

 

A

 

MBNM

8

NM

0

N

2.

Press 

M

1

N

 to select 

“

YES

”

. 

A

 

M

SET

N

 

A

 

M

SET

N

Note:

R

The ECM selection (feature #68 on page 43) will not be reset.

*1 This setting can be changed individually for the base unit and the cordless handset.

– To set the cordless handset LCD display contrast, see page 45.

7.2 Cordless handset programming

MDNMCN

M

ih

N

1.
2.

Press 

MCN

 or 

MDN

 to select the desired top-menu.

A

 

3.

Press 

MCN

 or 

MDN

 to select the desired item in

sub-menu 1. 

A

 

R

In some cases, you may need to select from
sub-menu 2. 

A

 

4.

Press 

MCN

 or 

MDN

 to select the desired setting. 

A

R

This step may vary depending on the feature
being programmed.

R

To exit the operation, press 

M

N

.

Note:

R

For other top-menus, please refer to each chapter.

R

The current item or setting is highlighted on the
display.

44

7. Programmable Features

Summary of Contents for KX-FC268FX









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands