manualshive.com logo in svg

Panasonic KX-FC268FX, Operating Instructions Manual

Share
Download
Panasonic KX-FC268FX Operating Instructions Manual Download Page 62

4

Close the back cover securely by pushing down on
the dotted area at both ends (

H

), then close the front

cover securely (

I

).

H

I

5

Install the paper tray (page 14), then insert the
recording paper gently (page 14).

11.1.2 When the recording paper was not fed
into the unit properly

The display will show the following:
–

“

CHECK PAPER

”

Remove the recording paper and straighten. Insert the
paper, then press 

M

SET

N

 to clear the message.

M

SET

N

11.2 Document jams

1

Open the front cover. Remove the jammed document
carefully (

A

).

A

2

Close the front cover securely.

Note:

R

Do not pull out the jammed paper forcibly before
opening the front cover.

11.3 Document feeder/recording
paper feeder/scanner glass
cleaning

Clean the document feeder/recording paper feeder/
scanner glass when:
– Documents or recording paper frequently misfeed.
– Smudges or black/white lines appear on the original

document when sending or copying.

Important:

R

Remove the recording paper, then remove the
paper tray beforehand, otherwise the paper may
misfeed or jam.

62

11. Maintenance

Summary of Contents for KX-FC268FX









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands