Panasonic KX-FC268FX Operating Instructions Manual Download

Page: 49 / 72

Note:

If the transferred call is not answered within 60
seconds, the call will ring at your cordless handset
again. Press

M N

to return to the outside call.

8.4.2 To a cordless handset (using the base
unit)

Base unit:

During a telephone call, press

INTERCOM

The call will be put on hold.

Base unit:
To page one cordless handset,

press the desired

cordless handset number.

To page all cordless handsets,

press

Cordless handset:

Press

M N

to answer the page.

Base unit (KX-FC278):

To complete the transfer, press

SP-PHONE

replace the handset.
To establish a conference call, press

Base unit (KX-FC268):

To complete the transfer, press

SP-PHONE

To establish a conference call, press

Transferring a call without speaking to the cordless
handset user
KX-FC278:

After step 2, press

SP-PHONE

or replace the handset.

The outside call rings at the cordless handset(s).

KX-FC268:

After step 2, press

SP-PHONE

The outside call rings at the cordless handset(s).

Note:

If the transferred call is not answered within 60
seconds, the call will ring at the base unit again.
Press

SP-PHONE

or lift the handset (KX-FC278

only) to return to the outside call.

8.5 Copying phonebook items

One or all phonebook items can be copied between a
cordless handset and the base unit or between 2
cordless handsets. The destination unit will save the
items in its phonebook.

8.5.1 To the base unit or another cordless
handset (using the cordless handset)

Copying one phonebook item
1.

Find the desired cordless handset phonebook item
(page 22).

2. “

Copy

”

3. To copy to the base unit

, press

To copy to another cordless handset

, enter the

desired cordless handset number you wish to send
the cordless handset phonebook item to.

When an item has been copied,

“

Completed

”

displayed.

To continue copying another item:

“

Yes

”

Find the desired cordless

handset phonebook item.

Copying all the phonebook items
1.

2. “

Copy All

”

3. To copy to the base unit

, press

To copy to another cordless handset

, enter the

desired cordless handset number you wish to send
the cordless handset phonebook item to.

When all items have been copied,

“

Completed

”

is displayed.

8.5.2 To the cordless handset (using the base
unit)

Copying one phonebook item
1.

MENU

MBNM

Press

to display

“

1 ITEM

”

SET

Enter the cordless handset number you wish to send
the item to.

Press

MJN

MKN

repeatedly to display the desired

item.

SET

To copy another item, repeat steps 4 and 5.

After copying is completed, press

MENU

Copying all the phonebook items
1.

MENU

MBNM

Press

to display

“

ALL ITEMS

”

SET

Enter the cordless handset number you wish to send
the item to.

After copying is completed, press

MENU

8. Multi-unit Operation

Summary of Contents for KX-FC268FX









































































Search results

Summary of Contents for KX-FC268FX

Reviews:

Related manuals for KX-FC268FX

Brands by name

Popular brands

Panasonic KX-FC268FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FC268FX

Reviews:

Related manuals for KX-FC268FX

Brands by name

Popular brands