Panasonic KX-FC243FX Operating Instructions Manual Download Page 6 | Manualshive

Page: 6 / 114

background image

Important Instructions

4

CAUTION:

Installation

L

Never install telephone wiring during a
lightning storm.

L

Never install telephone jacks in wet locations
unless the jack is specifically designed for
wet locations.

L

Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.

L

Use caution when installing or modifying
telephone lines.

L

Do not touch the plug with wet hands.

L

This unit should not be used near
emergency/intensive care medical
equipment and should not be used by people
with pacemakers.

Battery

To reduce the risk of fire or injury to persons,
read and follow these instructions.

L

Use only the battery(ies) specified.

L

Do not dispose of the battery(ies) in a fire.
They may explode. Check with local waste
management codes for special disposal
instructions.

L

Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.

L

Exercise care when handling the battery(ies).
Do not allow conductive materials such as
rings, bracelets or keys to touch the
battery(ies), otherwise a short circuit may
cause the battery(ies) and/or the conductive
material to overheat and cause burns.

L

Charge the battery(ies) provided with or
identified for use with this product only in
accordance with the instructions and
limitations specified in these operating
instructions.

L

Only use the included charger to charge the
battery(ies). Do not tamper with the charger.
Failure to follow these instructions may cause
the battery(ies) to swell or explode.

WARNING:

L

To prevent the risk of fire or electrical shock,
do not expose this product to rain or any type
of moisture.

For best performance

Battery charge

L

Place the cordless handset on the charger for
about

7 hours

before initial use.

L

For details, see page 21.

Operating distance and noise

L

The base unit and cordless handset use
radio waves to communicate with each other.

For maximum distance and noise-free
operation,

we recommend the following:

1

Placing your base unit away from electrical
appliances such as TVs, radios, personal
computers or other phones.

2

Placing the base unit in a HIGH and
CENTRAL location with no obstructions
such as walls.

1

2

FC243FX-PFQX2104ZA_en.book Page 4 Tuesday, November 2, 2004 2:10 PM

«
...
4
5
6
7
8
...
»

Summary of Contents for KX-FC243FX



















































































































Reviews:

No comments

Related manuals for KX-FC243FX

Brand: Janome Pages: 41

Brand: Panasonic Pages: 44

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 6

Brand: Kangaroo Pages: 36

Brand: Singer Pages: 32

Brand: Pfaff Pages: 56

OFX 500 LINKFAX

Brand: Olivetti Pages: 230

Brand: Pacific Pages: 8

Brand: Adler Pages: 5

Brand: handi quilter Pages: 69

Brand: MyBinding Pages: 3

DREAMSTITCHER 600SO

Brand: Reliable Pages: 32

Brand: Lavor Pages: 10

Brand: AFXlight Pages: 20

Brand: JUKI Pages: 59

Brand: Baby Lock Pages: 216

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands