Panasonic KX-FC243FX Operating Instructions Manual Download Page 17

Page: 17 / 114

2. Installation

2 Installation

Base Unit

2.1 Ink film installation /
replacement

Important:

Remove all blue shipping tape from the
unit before installation.

2.1.1 Installing the ink film

The included film roll is a starter ink film.

Open the front cover by pulling up the centre
part.

Release the back cover by pushing the green
button (

Open the back cover.

Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (

Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (

The ink film is safe to touch and will not
rub off on your hands like carbon paper.

Make sure the blue gear (

) and white

gear (

) are installed as shown.

Turn the blue gear (

) in the direction of the

arrow until the ink film is tight (

FC243FX-PFQX2104ZA_en.book Page 15 Tuesday, November 2, 2004 2:10 PM

Summary of Contents for KX-FC243FX



















































































































Search results

Summary of Contents for KX-FC243FX

Reviews:

Related manuals for KX-FC243FX

Brands by name

Popular brands

Panasonic KX-FC243FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FC243FX

Reviews:

Related manuals for KX-FC243FX

Brands by name

Popular brands