Panasonic KW2M-A User Manual Download

Page: 58 / 93

Miscellaneous functions

KW2M-A/X User's Manual

6.4.2 Current Demand

Current demand calculates the demand based on a thermal demand meter.

Current demand =
(Average of current

–

last current demand value) x 90% (fixed) + Last current demand value

If a stable current flows for the interval time, 90% of current value is displayed.

(%)

interval

time

6.4.3 Max. demand value

The device measures and logs the following maximum demand values: active, reactive, apparent, active
(export), reactive (export), current

6.4.4 Demand alarm output

・

Output with the pulse output terminal (open collector).

・

Output only when the output type is set to [alarm].

・

No alarm is output if the power demand alarm threshold is set to

‘0.000’k

6.4.5 Behavior during power failure and recovery

・

The device stops the demand measurement.

・

The device logs the values for max. demand and monthly max. demand in the internal memory.

・

The device stops the demand measuring until the next interval. As soon as the next interval has
started, the device starts measuring the demand.

Summary of Contents for KW2M-A






























































































Search results

Summary of Contents for KW2M-A

Reviews:

Related manuals for KW2M-A

Brands by name

Popular brands

Panasonic KW2M-A, User Manual

Search results

Summary of Contents for KW2M-A

Reviews:

Related manuals for KW2M-A

Brands by name

Popular brands