55
Replacing Consumable Roller Modules
8
Tilt the paper feed conveyor at a slight
angle pointing downward and attach it
as shown in the diagram to the right.
9
Close the paper feed conveyor.
•
Push up the paper feed conveyor until it
clicks into place.
•
You are now finished attaching the paper
feed roller module and separation roller
module.
To continue, replace the retard roller
module according to the following
procedure. (The retard roller module is
located in the conveyor.)
10
Using your fingers, hold the conveyor
and pull it towards you to open it.
•
When the conveyor is pulled towards you,
the click-stop mechanism will be
released.
Hook
Pin
Please attach the left side hook in the same way.
Paper feed
conveyor
Retard roller module
Conveyor
Document guide