manualshive.com logo in svg

Panasonic KV-S1027C, Service Manual

The Panasonic KV-S1027C scanner is a reliable and efficient document management solution. To get started quickly, make sure to download the free Quick Start Manual from our website. This comprehensive manual provides step-by-step instructions for optimal usage of the product. Get your manual now at manualshive.com.

Share
Download
background image

34

7.4.5.

Side Plate Assembly

7.4.6.

Conveyor roller

(1) Remove the Back Cover. (See 

Back Cover

 (

P.26

))

(2) Remove the screws A and remove the Earth Plate with the 

wire.

(3) Remove the 2 screws C and the Side Plate Assembly.

Reassembling Note:

Make sure to position the Idle Pulley of the Side Plate 
Assembly outside of the Conveyor Belt 2.

(1) Remove the Side Plate Assembly and Conveyor Belt 2. (See 

Side Plate Assembly

 (

P.34

))

(2) Pull and remove the Pulley of the Conveyor Roller (arrow 

2

), 

while unlocking the hook (arrow 

1

) on the Pulley.

Note:

After reassembling the Pulley, be sure to check that the 
Pulley is locked to the Conveyor Roller by pulling the 
Pulley.

(3) Slide and remove the bearing from the Conveyor Roller 

(arrow 

3

).

(4) Open and remove the Feed Roller Cover.
(5) Unlock the hook of the Conveyor Roller Bearing (arrow 

4

)

(6) Unlock the Conveyor Roller by turning the Conveyor Roller 

Bearing (arrow 

5

), 

(7) Slide the Conveyor Roller with the Conveyor Roller Bearing 

(arrow 

6

) and remove it (arrow 

7

).

(8) Remove the Support Bearing.

(9) Remove the polyslider.
(10) Remove the Conveyor Roller Bearing from the Conveyor 

Roller.

Idle Pulley

Idle Pulley

Conveyor Belt 2

tension

C

A

Earth Plate

Side Plate Assembly 

C

Bearing

Pulley

Conveyor
Roller

Hook

1

2

3

Feed Roller 
  Cover

Conveyor Roller

Conveyor
Roller
Bearing

Support
 Bearing

(9)

4

5

6

7

Conveyor Roller Bearing

Support Bearing

Polyslider

Summary of Contents for KV-S1027C
































































































































































































































































Reviews:

No comments

Related manuals for KV-S1027C

QPIX CBS1400 Manual preview
CBS1400
Brand: QPIX Pages: 2
CEN-TECH 62120 Owner'S Manual & Safety Instructions preview
62120
Brand: CEN-TECH Pages: 40
SSS Siedle CFPM 611-02 Product Information preview
CFPM 611-02
Brand: SSS Siedle Pages: 44
Nikon CoolScan VED User Manual preview
CoolScan VED
Brand: Nikon Pages: 160
IRIScan Executive 4 Quick User Manual preview
Executive 4
Brand: IRIScan Pages: 16
Regency HX1500 Owner'S Manual preview
HX1500
Brand: Regency Pages: 10
Regency Touch K500 Owner'S Manual preview
Touch K500
Brand: Regency Pages: 28
Radio Shack PRO-71 Owner'S Manual preview
PRO-71
Brand: Radio Shack Pages: 44
Baracoda RoadRunners BRR-LA Brochure & Specs preview
RoadRunners BRR-LA
Brand: Baracoda Pages: 2
Zircon MultiScanner i700 OneStep Quick Manual preview
MultiScanner i700 OneStep
Brand: Zircon Pages: 4
Canon imageFORMULA DR-2580C Easy Start Manual preview
imageFORMULA DR-2580C
Brand: Canon Pages: 2
CDVI IEVO-U Installation Manual preview
IEVO-U
Brand: CDVI Pages: 16
Makita DWD181ZJ Instruction Manual preview
DWD181ZJ
Brand: Makita Pages: 67
Canon Microfilm Scanner 350 Instruction Manual preview
Microfilm Scanner 350
Brand: Canon Pages: 60
Fujitsu fi-680PRB Operator'S Manual preview
fi-680PRB
Brand: Fujitsu Pages: 26
Fujitsu fi-7160 Operator'S Manual preview
fi-7160
Brand: Fujitsu Pages: 229
Fujitsu fi-65F Operator'S Manual preview
fi-65F
Brand: Fujitsu Pages: 85
Fujitsu fi-6800 Consumable Replacement And Cleaning Instructions preview
fi-6800
Brand: Fujitsu Pages: 26

Brands by name

Popular brands

Load more brands