Panasonic KV-S1027C Service Manual Download

Page: 26 / 255

7.2.4.

Front Cover

7.2.5.

Back Cover

7.2.6.

Top Cover

(1) Pull the Front Cover (2 arrows

) at the same time to unlock

3 hooks.

(2) Pull the Front Cover (2 arrows

) at the same time to unlock

3 hooks.

(3) Remove the Front Cover.

(1) Remove the Front Cover. (See

Front Cover

(

P.26

))

(2) Remove the screw C and H.
(3) Remove the AC Inlet cover.
(4) Remove the AC Inlet from the Back Cover.

(5) Open the ADF Door.
(6) Unlock the 2 hooks of the back side, while pulling the Back

Cover (2 arrows

(7) Unlock the 4 hooks of the upper side, while expanding the

Back Cover (2 arrows

(8) Remove Back Cover (arrow

(1) Pull the Top Cover (2 arrows

) at the same time to unlock 2

hooks

* See

PANEL SWITCH Board and LCD PANEL Board (KV-S10xxC)

(

P.27

) for the detail position of the hooks.

(2) Pull the Top Cover (1 arrows

) to unlock the center hook.

(3) Pull the Top Cover (2 arrows

) at the same time to unlock 2

hooks.

(4) Remove the Top Cover and disconnect the FFC cable.

* See

PANEL SWITCH Board and LCD PANEL Board (KV-S10xxC)

(

P.27

) for the cable position.

Front Cover

Hook

AC Inlet Cover

AC Inlet

Exit Tray

Back Cover

ADF Door

Hook

Top Cover

Summary of Contents for KV-S1027C
































































































































































































































































Search results

Summary of Contents for KV-S1027C

Reviews:

Related manuals for KV-S1027C

Brands by name

Popular brands

Panasonic KV-S1027C, Service Manual

Search results

Summary of Contents for KV-S1027C

Reviews:

Related manuals for KV-S1027C

Brands by name

Popular brands