24
EN
Installing the Appliance
Island
Fitting the Panel and Fixing the Hood Canopy
Before fixing the hood canopy to the frame:
■
Remove the grease filters from the hood canopy;
■
Remove any charcoal filters.
■
Working from below, fix the hood canopy to the
frame provided, using the 4 screws
(Ref. 12f)
provided.
■
Insert the rubber supports to the upper and lower
part of the panel
(Ref. 3)
as shown.
■
Slide the lower part of the panel to the base of the
chimney ensuring the metal tabs are secure.
12f
12e
7.4
12c
NOTE
Make sure that the power cable has been properly inserted into the
control board unit socket located on the side of the fan.