22
EN
Installing the Appliance
Wall Mounted
Mounting the Hood Body
Before attaching the hood body, tighten the two screws
Vr
located on the hood body mounting points.
■
Hook the hood body on to the screws
(Ref.
12a)
.
■
Fully tighten the support screws
(Ref.
12a)
.
■
Adjust the screws
(Ref. Vr)
to level the hood body.
■
If necessary, it is possible to fasten the appliance to
the wall using more screws with wall plugs, which
can be positioned from inside the hood canopy.
Island and Wall Mounted
Ducted Mode Air Exhaust System
When installing the ducted mode, connect the hood to
the chimney using either a flexible or rigid pipe ø 150
or 120 mm, the choice of which is left to the installer.
■
To install a ø 120 mm air exhaust connection, insert
the reducer flange
(Ref.
9)
on the hood body outlet.
■
Fix the pipe in position using sufficient pipe clamps
(not supplied).
■
Remove charcoal filters if present.
12a
Vr
ø 150
9
ø 120