UPnP
4.3.7
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. For UPnP on different routers, you must disable
UPnP function. See Figure 4-20.
In the Windows OS, From Start->Control Panel->Add or remove programs. Click the “Add/Remove
Windows Components” and then select the “Network Services” from the Windows Components Wizard.
Click the Details button and then check the “Internet Gateway Device Discovery and Control client” and
“UPnP User Interface”. Please click OK to begin installation.
Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the network camera can auto
detect it via the “My Network Places”.
Under manual mode, you can modify external port. Under auto mode, select idle port for auto port
mapping without user modification.
Figure 4-20
SNMP (K-EW214L01E, K-EF234L01E)
4.3.8
The SNMP interface is shown as in Figure 4-21.
The SNMP allows the communication between the network management work station software and the
proxy of the managed device. Please install the software such as “MG MIBBrowser 8.0c “ software or
establish the SNMP service before you use this function. You need to reboot the device to activate the
new setup.
47
Summary of Contents for K-EF134L02AE
Page 32: ...Figure 4 4 Figure 4 5 28 ...
Page 33: ...Figure 4 6 Figure 4 7 29 ...
