2. Setting Up Your Phone
ICX-
45
-750
ICX (International), issued June 2000
29
Notes:
• Before linking multiple SSD numbers to a PSD bin, the SSD bins must
already have been programmed with the appropriate speed dial information.
(This requires system programming.)
• If numbers do not appear on the display (
00
-
79
or
000
-
799
) when you use
SSD codes, your extension is not programmed to display that data.
1.
Pick up the handset or press the
ON/OFF
key.
2.
Either:
• Press the
PROG
key and then press the
MEMORY
key.
OR
• Enter the Speed Dial Set/Clear code (default =
710 (HK/UK)
or
710#
).
3.
Press the soft or one-touch key (for the PSD bin [
80
-
99
]) to be programmed.
4.
Press the
MEMORY
key.
5.
Enter the SSD bin number that contains the first part of the number to be dialled.
(If a pause is required, press the
REDIAL
key.)
6.
Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be
linked.
7.
Press the
HOLD
key when you are finished.
8.
Replace the handset or press the
ON/OFF
key.
1.
If necessary, select the trunk group (
9
[UK/HK],
0
[Tawain, Malaysia, Indonisia],
or
81
-
84
) to access an outside line. (Normally the trunk is selected by the speed
dial numbers.)
2.
Press the PSD key.
Assigning and Deleting Names for PSD Numbers
After assigning a PSD number to a one-touch or soft key, you can assign a name to
the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name
when you are in the PSD Directory mode.
To link speed dial numbers to a PSD bin
To use a PSD key that links multiple speed dial numbers
