2. Setting Up Your Phone
40
ICX (International), issued June 2000
ICX-
45
-750
To set the Special Day Modes using either a large-display
or small-display phone:
To set the Message Key ID code using either a large-
display or small-display phone:
7.
Press
MEMORY PROG
to return to “81-User Maintenance” (step 1).
OR...
Press
MEMORY ON/OFF
to exit User Maintenance.
1.
Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF
2.
Enter:
07
, press
HOLD
, enter:
1
, and press
HOLD
HOLD
.
3.
Enter:
Start Time in Hours - 2 characters, and Minutes - 2
characters
for the Special Day 1 mode and press
HOLD
to store the
entry.
Note:
To clear an entry or existing data, press the
FL/R
key.
4.
Enter:
Desired mode for Special Day: 0 - None, 1 - Day 1, 2
- Day 2, 3 - Night, 4 Night 1, 5 - Night 2
and press
HOLD
to store
the entry.
Note:
To clear an entry or existing data, press the
FL/R
key
5.
To set additional Special Day modes, press the
VOLUME
up or down arrow
or
HOLD
to move to the desired mode.
6.
Repeat steps 3-5 until all Special Day modes are set. (Up to 20 Special Days
may be entered.).
Note:
The entry positions are listed in Chapter 4 of
Section 700 - Feature Operations
.
7.
Press
MEMORY PROG
to return to “81-User Maintenance” (step 1).
OR...
Press
MEMORY ON/OFF
to exit User Maintenance.
1.
Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF
2.
Enter:
06
and press
HOLD
HOLD
.
3.
Dial the
Extension Number of the Phone Being
Programmed
and press
HOLD
.
Message Key
