Panasonic HDC-SD1, Operating Instructions Manual

Page: 48 / 140

48
VQT1A24
Recording
Recording still pictures
(JPEG)
Record the still picture on an SD card.
≥
This number of recording pixels for still pictures
is compatible with the 16:9 aspect ratio of a
wide-screen TV. They are recorded at
1920
k 1080.
1
Rotate the mode dial to select
.
The lens cover opens automatically.
2
Open the LCD monitor.
3
Press the PHOTO SHOT button
halfway in order to adjust
focusing. (For auto focusing
only)
The shutter speed and the iris/gain value are
fixed and the unit focuses on the subject
automatically.
≥
If you set [O.I.S.] ( l 59) to [ON], then the
image stabilizer function will be more
effective. ([
] (MEGA optical image
stabilizer) will be displayed.)
A
Focus indication
±
(The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful.
B
Focus area
4
Press the PHOTO SHOT button
fully to take the picture.
≥ In order to take better still pictures, the
screen will brighten when recording.
To record still pictures clearly
≥
When zooming in on the subject with a
magnification of 4
k
or higher, it is difficult to
reduce the slight shaking from holding this unit
by hand. We recommend decreasing the zoom
magnification and approaching the subject
when recording.
≥
When recording still pictures, hold the unit
firmly with your hands and keep your arms
stationary at your side so as not to shake the
unit.
≥
You can record stable pictures without shaking
by using a tripod and the remote control.
≥
For information about the number of
recordable still pictures on an SD card
(
l 51)
≥ The sound cannot be recorded.
≥ If the write protection switch on the SD card is
set to LOCK, it cannot be used for recording.
≥
The PHOTO SHOT button on the remote
control cannot be pressed halfway.
MEGA
A
B
VQT1A24_ENG_PP.book 48 ページ ２００７年１月２１日 日曜日 午後１時１７分