90
VQT1A24
With other products
With a printer (PictBridge)
To print pictures by directly connecting this unit
to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for
the printer.)
≥
Use the AC adaptor to free you from worrying
about the battery running down.
¬
Insert an SD card with recorded
images in this unit and then set the
mode dial to
to turn on the power.
1
Connect this unit and a printer.
A
USB cable (supplied)
≥
Insert the plugs as far as they will go.
The [PictBridge] indication appears on this unit’s
screen.
≥
If the [PictBridge] indication does not appear or
continues to flash, disconnect and then
reconnect the USB cable or check the printer,
SD card and settings on this unit.
≥
Do not use any other USB connection cables
except the supplied one. (Operation is not
guaranteed with any other USB cables.)
2
Select a file to be printed, then
press the cursor button.
The number of pictures set is displayed.
3
Move the cursor button up or
down to select the desired
number of prints, then press the
cursor button.
≥
You can set up to 9 prints.
≥
To cancel the setting, set the number of
prints to [0].
≥
Up to 8 files displayed can be set in
succession by repeating steps 2 and 3.
4
Press the MENU button to
display the PictBridge menus.
5
Select the date print setting on
[DATE PRINT].
≥
If the printer is not capable of date printing,
this setting is unavailable.
6
Select the paper size setting on
[PAPER SIZE].
[STANDARD]
:
Size specific to the printer
[4
k
5 INCH]
:
L size
[5
k
7 INCH]
:
2L size
[4
k
6 INCH]
:
Postcard size
[A4]
:
A4 size
≥
You cannot set paper sizes not supported on
the printer.
A
VQT1A24_ENG_PP.book 90 ページ ２００７年１月２１日 日曜日 午後１時１７分
Summary of Contents for HDC-SD1
Page 139: ...139 VQT1A24 ...
