Panasonic HDC-SD1, Operating Instructions Manual

Page: 35 / 140

35
VQT1A24
Setup
ª
Concerning the SD card
≥ Do not touch the terminals on the back of the
SD card.
≥
Electrical noise, static electricity or the failure of
this unit or the SD card may damage or erase
the data stored on the SD card. Save important
data recorded on this unit to a PC using the
USB cable (supplied), HD Writer Ver1.0E for
SD1 etc. (
l
102) (We recommend using
HD Writer Ver1.0E for SD1 to acquire data
recorded on this unit.)
≥ When using an SD card on which data has
been written many times, the remaining time
left for recording may be reduced. (
l 46)
ª
Card access lamp
≥ When this unit accesses the SD card (reading,
recording, playback, erasing etc.), the access
lamp lights up.
≥
If the following operations are performed when
the access lamp is lit, then the SD card or the
recorded data may be damaged or this unit
may malfunction.
– Opening the card slot cover and removing
the SD card
– Operating the mode dial
– Removing the battery or disconnecting the
AC adaptor
How to use the cursor button
This unit has a cursor button
A
for selecting
functions, performing operations etc. so it is easy
to operate this unit with one hand.
B
Operating the operation icons and menu
screens that are displayed
The following describes operations on the menu
screen and selection of files on the thumbnail
view screen etc.
Move the cursor button up, down,
left, or right to select an item or
scene, and then press the cursor
button to set it.
1
Select by moving up.
2
Select by moving down.
3
Select by moving left.
4
Select by moving right.
5
Press the cursor button to set the item.
≥
Menu screen operations ( l 39)
Basic operations
1/3 1/3 NEXT
NEXT
1/3 NEXT
B
A
1
3
4
2
5
VQT1A24_ENG_PP.book 35 ページ ２００７年１月２１日 日曜日 午後１時１７分