118
VQT1N87
If the SD card is inserted
in another device, it is not
recognised.
≥
Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card)
that you inserted. Refer to the operating instructions of the
device for details.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥
No operation can be performed on this unit when it is
connected to a PC.
≥
Turn off the power to this unit. If the power cannot be turned
off, press the RESET button, or remove the battery or AC
adaptor and then reattach it. Turn on the power again. If
normal operation is still not restored, detach the power
connected, and consult the dealer who you purchased this
unit from.
White round spots like
soap bubbles appear on
the recorded picture.
≥
If you take a picture with the
flash in a dark place or indoors,
white round spots may appear
on the picture caused by the
flash reflecting of particles of
dust in the air. This is not a
malfunction.
A characteristic of this is that the number of round spots
and their position differ in every picture.
“PUSH THE RESET
SWITCH.” is displayed.
≥
The unit has automatically detected an error. Press the
RESET button with the projecting part of the grip belt
A
.
This will restart the unit.
≥
If you do not press the RESET button, the power to this unit
is turned off automatically about 1 minute later.
≥
Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and consult the dealer who you
purchased this unit from. Do not attempt to repair the unit
by yourself.
Problem
Check points
HDCHS9EP-VQT1N87_eng.book 118 ページ ２００８年１月１１日 金曜日 午後７時５２分
