95
VQT3Y48
Deleting part of a scene (AVCHD)
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥
Change the mode to
and touch the play mode select icon. Then, select the
AVCHD scene. (
l
31)
1
Select the menu.
2
Touch the scene with a part to delete.
3
Set the section to delete by touching and
sliding the top and bottom section selection
buttons .
≥
It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (
l
80)
4
Touch [ENTER].
5
Confirm (play back) the scene after editing by touching [YES].
≥
A confirmation message appears when [NO] is touched. Proceed to Step 7.
6
Stop the playback.
≥
A confirmation message appears.
7
Touch [ENTER].
≥
Repeat steps 2-7 to continuously delete parts from other scenes.
≥
Deleting of part cannot be performed when there are 99 scenes in a single date.
≥
It may not be possible to delete part of a scene with a short recording time.
≥
The scene will be divided into two scenes when middle part of a scene is deleted.
≥
The relay information is deleted when part of a scene that was relay recorded is deleted,
making it impossible to perform the Relay scene combining. (
l
99)
: [EDIT SCENE]
#
[SECTION DELETE]
MENU
0h00m15s
0h00m15s
0h00m15s
HC-V700M&V700_EB-VQT3Y48_mst.book 95 ページ ２０１１年１２月２６日 月曜日 午前９時３６分
