104
VQT3Y48
Connecting with a HDMI mini cable
Select the desired method of HDMI output.
≥
[AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
≥
Image will not display on TV for a few seconds in the following cases.
j
When the 1080/50p recording mode is turned on/off during Motion Picture Recording
Mode
j
When you touch the play mode select icon to select [1080/50p] and then touch [ENTER]
during Playback Mode
j
When the play mode selection is set to
in the Playback Mode, and it is switched
between the 3D still picture and the 2D still picture
j
When the 1080/50p, 1080/50i, or side-by-side scenes are switched.
Connecting with the AV multi cable
Select the desired setting of AV multi connector output.
Changing the component output setting
≥
Set [VIDEO LIGHT] to [OFF] when recording with the TV connected to the component
terminal to confirm the recording. (
l
57)
: [SETUP]
#
[HDMI RESOLUTION]
#
[AUTO]/[1080p]/[1080i]/[576p]
: [SETUP]
#
[AV MULTI]
#
desired setting
[COMPONENT]:
When connecting to the component terminal
[AV OUT]:
When connecting to the video terminal
: [SETUP]
#
[COMPONENT OUT]
#
desired setting
[1080i]:
When connecting to the component terminal on the TV compatible with
1080i. (Playback is in high definition quality.)
[576i]:
When connecting to the component terminal on the TV compatible with 576i.
(Playback is in standard quality.)
MENU
MENU
MENU
HC-V700M&V700_EB-VQT3Y48_mst.book 104 ページ ２０１１年１２月２６日 月曜日 午前９時３６分
