38
VQT3Y48
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥
When in Quick Start Standby Mode about 70% of the power used in recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick Start will not work if there is no SD card inserted.
≥
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥
Change the mode to
or
.
1
Set [QUICK START] to [ON].
2
Close the LCD monitor.
The status indicator
A
flashes green and the unit goes into
Quick Start standby mode.
≥
The lens cover does not close.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is put
into recording pause.
≥
Quick Start standby mode is cancelled if
j
about 5 minutes elapsed
j
mode is set to
≥
Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥
It may take some time for Automatic White Balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes approx.1
k
.
≥
When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (
l
37)/[ECONOMY (AC)] (
l
37), close the LCD monitor once and open it again.
≥
Turn the unit off using the power button.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (
l
144)
[QUICK START]
[ON]/[OFF]
[ALERT SOUND]
/
/[OFF]
(Volume low)/
(Volume high)
HC-V700
HC-V700M
HC-V700M&V700_EB-VQT3Y48_mst.book 38 ページ ２０１１年１２月２６日 月曜日 午前９時３６分
