background image

122

VQT3Y48

2

Touch [RECORDER] on the screen of this unit.

When you select an option other than [RECORDER], reconnect the USB cable.

When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen 
to turn the LCD monitor on.

3

Touch the media you wish to dub.

When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen 
to turn the LCD monitor on.

4

Dubbing through operations on the Blu-ray disc recorder or high-
definition (AVCHD) compatible DVD recorder.

Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.

Do not use any other USB cables except the supplied one. (Operation is not guaranteed 
with any other USB cables.)

When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using 
a USB cable while the unit is turned on, power is also supplied from the connected 
equipment to this unit.

For details on dubbing and playback methods, read the operating instructions of the 
Blu-ray disc recorder or DVD recorder.

When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may 
appear on the television connected to the Blu-ray disc recorder. In this case as well, 
perform the operations of Steps 1 to 4.

You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray 
disc recorder or DVD recorder. Disconnect the USB cable before performing either of these 
operations.

If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc 
recorder to cancel the dubbing.

About the screen indication of the unit

When the unit is accessing the SD card, card access icon (

) appears on the unit 

screen or the access lamp is on.

 When the unit is accessing the built-in memory, built-in memory access icon (

appears on the unit screen or the access lamp is on.

Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is 
accessing the media, as this may result in the loss of recorded content.

HC-V700

HC-V700M

HC-V700M

HC-V700M

HC-V700M&V700_EB-VQT3Y48_mst.book  122 ページ  2011年12月26日 月曜日 午前9時36分

Summary of Contents for HC-V700









































































































































































Reviews: