Panasonic HC-V385 Operating Instructions Manual Download

Page: 98 / 247

- 98 -

The scenes put together as a Highlight Playback can be saved as a single scene.

Stop the playback of the Highlight Playback or wait until the Highlight
Playback is finished.

Touch [SAVE].

Select the format to save.

*1 This format is displayed only when an AVCHD scene is selected.
*2 This format is not displayed when an AVCHD scene is selected.
*3 [MP4 1920

1080/25p] cannot be selected when an MP4 [720/25p] scene is selected.

(When [AVCHD 1920

1080/50i] is selected)

≥

Scenes recorded in 1080/50p are converted to 1080/50i (picture quality [HA] of [REC MODE])
and saved.

≥

Scenes recorded in 1080/50i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.

Touch [YES].

≥

is displayed on the thumbnail of the scenes saved by the Highlight Playback.

Saving the Highlight Playback

The recorded scenes can be saved in the SD card.

The recorded scenes can be saved in the built-in memory.

[AVCHD 1920

1080/50i]

It will be saved in high-definition image quality.

[MP4 1920

1080/25p]

*2, 3

It will be saved in high-definition image quality. The format
supports playback on a PC.

[MP4 1280

720/25p]:

It will be saved with an image quality that allows you to
upload it on the Internet in higher image quality. The format
supports playback on a PC.

[MP4 640

360/25p]:

It will be saved with an image quality that allows you to
upload it on the Internet faster. The format supports
playback on a PC.

Touch [EXIT].

Touch [COPY] or [EXIT].

≥

The Highlight Playback saved in the built-in memory can be copied to the SD card. To copy
to the SD card, select [COPY].

≥

Operate according to the message and touch [EXIT] at the end.

W585 V385

W585M

W585 V385

W585M

Summary of Contents for HC-V385
























































































































































































































































Search results

Summary of Contents for HC-V385

Reviews:

Related manuals for HC-V385

Brands by name

Popular brands

Panasonic HC-V385, Operating Instructions Manual

Search results

Summary of Contents for HC-V385

Reviews:

Related manuals for HC-V385

Brands by name

Popular brands