Panasonic HC-V385 Operating Instructions Manual Download

Page: 166 / 247

- 166 -

≥

If the selected line quality has an image quality higher than the one you are using, images will
appear as if the frame rate is low.

≥

Operation cannot be guaranteed for all devices.

≥

Even with a broadband line, the recommended optimal speed may not be reached depending on
your environment.

≥

Narrowband lines such as analogue modems cannot be used.

≥

If the line for the smartphone is switched, communication may be interrupted. In that case,
connect again.

∫

To save in USTREAM

Touch [Save in USTREAM].

Touch [ON] or [OFF].

[ON]:

Live motion pictures are saved on USTREAM.

[OFF]:

Select this option not to save on USTREAM.

∫

Broadcasting live with no sound

Touch [Microphone On Air].

Touch [OFF].

[ON]:

Sound is output during live broadcasts.

[OFF]:

Sound is not output during live broadcasts.

Summary of Contents for HC-V385
























































































































































































































































Search results

Summary of Contents for HC-V385

Reviews:

Related manuals for HC-V385

Brands by name

Popular brands

Panasonic HC-V385, Operating Instructions Manual

Search results

Summary of Contents for HC-V385

Reviews:

Related manuals for HC-V385

Brands by name

Popular brands